The pin header has the article number 231-602 and enables smooth electrical installation. With our PCB connectors you get a universal connector system that can be used in a variety of ways: as a PCB connector, as a feed-through connector, as a flying lead for various mounting types or as a connector on terminal blocks. This pin header requires a stripping length of between 8 and 9mm for the conductor connection. This product is equipped with CAGE CLAMP® technology. The CAGE CLAMP® universal connection provides you with a reliable and maintenance-free connection technology for connecting all conductor types using a cage clamp. No pre-treatment of the conductors is necessary, for example by crimping on wire end ferrules. The dimensions are width x height x depth (13.2 x 14.3 x 27.5mm0. Depending on the conductor type, the pin header is designed for conductor cross-sections from 0.08mm² to 2.5mm². Tin was used for the contact surface. This pin header/connector is operated using an operating tool. WAGO's MCS – "Multi Connection System" comprises a total of seven families with pitches from 2.5mm to 10.16mm and offers a wide range of application possibilities with a conductor cross-section range from 0.08 to 25mm².
