Connect conductors quickly and securely with this PCB terminal block (item number 2616-1103/020-000). It is a universal connector that can be used practically anywhere, for example, as a pluggable PCB connector, panel feedthrough header, connector for rail-mount terminal blocks, or a floating connector for different mounting methods. Our PCB terminal block is rated for 1000V and is designed for use with a rated current of up to 76A. It can therefore be used in high-load applications. Strip lengths must be between 18mm and 20mm when connecting conductors to this PCB terminal block. This product features one conductor terminal and utilizes Push-in CAGE CLAMP®. Push-in CAGE CLAMP® technology provides a universal connection solution for all conductor types. It allows both solid and fine-stranded conductors with ferrules to be inserted directly into the clamping point without the need for tools. The dimensions are 32.8 x 37.2 x 32mm (width x height x depth). This PCB terminal block is suitable for conductor cross sections ranging from 0.75mm² to 16mm². It features one level and three clamping points that you can use to connect three potentials / 3 poles. The gray housing is made of polyamide (PA66) for insulation, the contacts are made of electrolytic copper (ECu), and the clamping spring is made of chrome-nickel spring steel (CrNi). The contact surface is coated with tin. A lever is used to operate this PCB terminal block. THT is used to solder the PCB terminal block. The conductor is designed to be inserted into the board at a 0° angle.. The solder pins measure 1.2 x 1.2 mm in cross-section and 4 mm in length and are organized over the entire terminal strip (staggered). There are three solder pins per potential.
