The pin header with the article number 231-611 ensures smooth electrical installation. With our printed circuit board connectors you get a universal connector system that can be used in a variety of ways: as a printed circuit board connector, as a feed-through connector, as a flying lead for various mounting types or as a connector on terminal blocks. This pin header requires stripping of insulation with lengths between 8 and 9mm for the conductor connection. This product is based on CAGE CLAMP® technology. The proven and maintenance-free CAGE CLAMP® universal connection enables the connection of all conductor types with a cage clamp. Pre-treatment of the conductors, e.g. by crimping on wire end ferrules, is not necessary. The dimensions (width x height x depth) are (58.2 x 14.3 x 27.5mm). Depending on the conductor type, this pin header is suitable for conductor cross-sections from 0.08mm² to 2.5mm². Tin has been used for the surface of the contacts. This pin header/connector is actuated using an operating tool. WAGO's MCS – "Multi Connection System" – is a versatile connector system for your consistent system wiring. It enables simplified wiring in cable pre-assembly and on devices thanks to two actuation directions for the CAGE CLAMP® variants.
